The RETRO SERIES is ready for small stock to 140 amp, or more, One Wire alternators. It will wire your turn signals, headlights, tail lights, brake lights, gauges / senders, engine (starter, alternator, distributor), ignition switch, headlight switch, Hi/Lo Dimmer Switch, 3rd Brake Light & License Plate Light. It can be used for a dash mounted or steering column mounted Key, Hi/Lo and turn signal Switch.
Perfect for Aftermarket Universal Steering columns like I-Did-It or Flaming River
• Barely need the instructions
• Not a ‘watered down’ universal harness like competitors offer
• Wire lengths predetermined
• Wires clearly printed showing the function of each wire
• Terminals & connectors installed on most of the wires
• Ready to connect to the electrical devices
• Limited to basic needs
• 3-4 hour time period is sufficient to completely wire with this kit*
Note: Block with relays and flashers is a separate unit to be mounted next to or near the fuse blocks. Combined unit in photo is for display purposes only. Product may vary from photo.